Fire hazard in transportation infrastructure: Review,assessment, and mitigation strategies

This paper reviews the fire problem in critical transportation infrastructures such as bridges and tunnels. The magnitude of the fire problem is illustrated, and the recent increase in fire problems in bridges and tunnels is highlighted. Recent research undertaken to address fire problems in transportation structures is reviewed, as well as critical factors governing the performance of those structures. Furthermore, key strategies recommended for mitigating fire hazards in bridges and tunnels are presented, and their applicability to practical situations is demonstrated through a practical case study. Furthermore, research needs and emerging trends for enhancing the “state-of-the-art” in this area are discussed.     

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

Formation of a geometric pattern with a mobile wireless sensor network

Mobile wireless sensor networks (MWSNs) will enable information systems to gather detailed information about the environment on an unprecedented scale. These self‐organizing, distributed networks of sensors, processors, and actuators that are capable of movement have a broad range of potential applications, including military reconnaissance, surveillance, planetary exploration, and geophysical mapping. In many of the foreseen applications, the MWSN will need to form a geometric pattern without assistance from the user. In military reconnaissance, for example, the nodes will be dropped onto the battlefield from a plane and land at random positions. The nodes will be expected to arrange themselves into a predetermined formation in order to perform a specific task. Thus, we present algorithms for forming a line, circle, and regular polygon from a given set of random positions. The algorithms are distributed and use no communication between the nodes to minimize energy consumption. Unlike past studies of geometric problems where algorithms are either tested in simulations where each node has global knowledge of all the other nodes or implemented on a small number of robots, the robustness of our algorithms has been studied with simulations that model the sensor system in detail. The simulations demonstrate that the algorithms are robust against random errors in the sensors and actuators. © 2004 Wiley Periodicals, Inc.     

Solubilization of Glibenclamide with β-Cyclodextrin & its Derivatives

Gilbenclamide, a widely used potent hypoglycaemic agent was solubllized using β -Cyclodextrin and β -Cyclodextrin derivatives. Complexes were prepared by kneading method in a molar ratio of 1:1 of the drug and the cyclodextrlns respectively. The Glibenclamide β -Cyelocextrin complex was characterized and evaluated by I.R. studies, Differential Scanning Calorimotry 6 X-ray diffractometry. The in-vitro dissolution rates of drug from inclusion complexes of β Cyclodextrins and its derivatives were compared. A significant Improvement In dissolution lor, rates of Gllbenclamide was observed with Inclusion complexes of all the Cyclodextrins. However, the solubilizing effect was more in case of β-Cyclodextrin derivatives.     

Unit commitment ? a fuzzy mixed integer Linear Programming solution

Unit commitment (UC) of a large system is a complex puzzle with integer/continuous variables and numerous inter-temporal constraints. After deregulation, price offers submitted by GenCos are predominantly in the form of linear price quantity (PQ) pairs. A fuzzy UC formulation that uses price offers modeled as PQ pairs. This fuzzy linear optimisation formulation of UC is solved using a mixed integer linear programming (MILP) routine. In this formulation, start up cost is modelled using linear variables. The fuzzy formulation provides modeling flexibility, relaxation in constraint enforcement and allows the method to seek a practical solution. The use of MILP technique makes the proposed solution method rigorous and fast. The method is tested on a 24 h, 104-generator system demonstrating its speed and robustness gained by using the LP technique. A five-generator system is additionally used to create a see-through example demonstrating advantages of using the fuzzy optimisation model.     

Heat and Fluid Flow in an Optical Switch Bubble

The Agilent all-optical bubble switch uses bubbles in an organic fluid index matched to a silica planar lightwave circuit. The bubble is created and sustained by heaters that are deposited on an attached silicon substrate. Testing of the bubble shows how heater power and ambient pressure affect bubble shape, size, and optical reflection characteristics. Heat and fluid flow in the bubble were modeled in 2D and 3D using the homogeneous bubble model in the Flow3D modeling software. Fluid condensing on the trench wall causes a dimple on the bubble and hence nonoptimum optical reflection. To aid understanding, the bubble, silica walls, and heaters were also modeled as a thermal resistance network. Because the pressure drop across the bubble wall is fixed, the bubble size is determined by P_res/DeltaT_t , where P_res is the heater power and DeltaT_t is the temperature difference between the bubble and the substrate. Heating the trench walls beyond the bubble temperature with heaters located underneath the trench wall will dry out the trench wall and give a stable optical reflection. As DeltaT_t approaches zero, a bubble is sustained without any heater power and with zero fluid flow. This "static" bubble provides for a very stable optical reflection     

IEEE-PES Transmission and Distribution Conference and Exposition Call for Papers

Static network-related system voltage stability margin (VSM) depends on the availability of reactive power to support the transport of real power from sources to sinks. Based on this premise, the total VAr loss is minimized in the unified OPF framework considering real and reactive power controllers, and its effect on VSM is studied. Studies are conducted on a three-bus system, the IEEE 30-bus system, and a 191-bus Indian electric power system, and their results are reported.     

Triple Metal Surrounding Gate Junctionless Tunnel FET Based 6T SRAM Design for Low Leakage Memory System

Silicon - The promising capability of Triple Material Surrounding Gate Junctionless Tunnel FET (TMSG – JL – TFET) based 6 T SRAM structure is demonstrated by employing...